Insert the SIM card and battery
Insert the SIM card
Important: To prevent damage to the SIM card, always remove the battery
before you insert or remove the card.
Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card,
a micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see
figure) in this device. A micro SIM card is smaller than the standard SIM card. This
device does not support the use of micro-SIM cards and use of incompatible SIM
cards may damage the card or the device, and may corrupt data stored on the card.
1 Remove the back cover.
2 If the battery is inserted, remove the battery.
Always switch the device off and disconnect the charger before removing the
battery.
12 Get started
3 Open the cover of the SIM card slot.
4 Insert a SIM card in the slot. Ensure that the contact area on the card is facing
up and the bevelled corner is facing toward the device. Push the card in.
5 Close the cover of the SIM card slot. Ensure that the cover is properly closed.
Get started 13
If the SIM card is not properly in place, the device can only be used in the offline
profile.
Insert the battery
1 Insert the battery.
2 To replace the cover, direct the top locking catches toward their slots. First,
press the cover down in the middle, so that the middle catches lock into place.
When the locking catches in the middle are in place, press the cover down at
the bottom of the device.
See "Remove the SIM card", p. 37.
14 Get started